Speed Limiter Fitting in Liverpool: Mobile Fleet Installation

AutoKontrol fits speed limiters across Liverpool and the Liverpool City Region through a nationwide mobile installer network, coming to your depot or yard. Your vehicles stay on your site, your drivers stay on shift, and each unit is back in service within a few hours.

If you run HGVs, coaches, or a van fleet anywhere across Merseyside, this page explains how mobile fitting works, which vehicles need a limiter, and why fleet operators choose a professionally installed, type-approved system.

Why Liverpool fleets fit speed limiters

The Port of Liverpool is one of the UK’s major freight and container gateways. That gateway generates a steady flow of HGV and haulage traffic in and out of the docks, feeding a large base of distribution, logistics, and container haulage operators right across the Liverpool City Region. If your business moves goods to or from the port, or runs regular trunking between Merseyside and the rest of the UK, speed limiter compliance sits at the centre of your operation.

There is also growing road-safety and clean-air pressure on commercial vehicles working in and around the city. Fleets operating in busy urban and dock environments are expected to demonstrate that their vehicles are governed, safe, and well managed.

A type-approved speed limiter helps port-linked haulage operators on three fronts:

• Fuel: Holding a vehicle to its set speed cuts fuel burn on motorway and trunk-road running, which adds up quickly across a fleet doing high mileage to and from the docks.
• Compliance: HGVs must be governed to the legal 56mph limit. A properly fitted and calibrated limiter keeps you on the right side of that requirement.
• Safety: Capping top speed reduces accident risk in mixed dock, urban, and motorway conditions, which supports both your safety record and your insurance position.

If you want the background on the technology itself, read our guide to what a speed limiter is.

Mobile fitting across Liverpool and Merseyside

We come to you. Rather than sending vehicles off-site to a workshop and losing them for a day, our engineers travel to your depot, yard, or premises anywhere across Liverpool and Merseyside and fit on location.

• Typical fitting time is 2 to 3 hours per vehicle, depending on type.
• Downtime stays minimal because the work happens where your vehicles are already parked.
• Fleet rollouts are scheduled so multiple vehicles can be done in a day, keeping disruption to your operation low.

Installation is delivered through SGH Connect, the nationwide installer network of our parent company, Scorpion Group Holdings. That national reach means we can cover a single van in Bootle or Speke just as easily as a multi-site fleet spread across the wider city region. For a full walk-through of what happens on the day, see our speed limiter installation guide.

Which vehicles need a speed limiter

We fit across the full range of commercial vehicles working in and around Liverpool:

• HGVs over 3.5 tonnes must be limited to 56mph (90 km/h) by law. This covers the rigid and articulated units doing container and distribution work to and from the port.
• Buses and coaches with more than 8 passenger seats must be limited to 62mph (100 km/h).
• Van fleets under 3.5 tonnes are not legally required to fit a limiter, but many operators do so voluntarily for the fuel, safety, and insurance benefits.
• Port and container haulage tractor units running regular dock trunking, where governed speed and reliable compliance documentation matter most.

Professional fitting vs self-fit kits

You will find DIY, self-fit CAN-based speed limiter kits on the market. Those kits are aimed at the trade, meaning auto-electricians and workshops who install as part of their day-to-day work.

For a fleet operator, professional fitting is the route that stands up on merit. A professionally installed system gives you:

• An EU/ECE R89 type-approved limiter, not a generic restrictor.
• Proper calibration to within tolerance, with a calibration certificate.
• A warranty on the installed system.
• Documented compliance you can put in front of the DVSA or your insurer, including the installation certificate and tamper-evident seal record.

When a DVSA inspector or your insurer asks for proof, documented, certified installation is what keeps your operator licence and your cover secure. That is why fleet operators choose professional fitting.

Why AutoKontrol

• EU/ECE R89 type-approved systems, certified through UTAC, TUV, and VCA.
• Drive-By-Wire pioneer: we developed the DBW electronic speed limiter that the industry now treats as standard.
• TrackSpeed: our unique combined speed limiter and GPS tracking system in a single device.
• GeoKontrol geofenced zones: set different speed limits by location, useful for holding vehicles to a low speed inside port areas, depots, and yards.
• UK built since 1985, with decades of speed limiter engineering behind every unit.
• Part of Scorpion Group Holdings, the UK vehicle technology group behind our nationwide installation network.

Browse the full product range to see System 80, TrackSpeed, and GeoKontrol.

Frequently asked questions

Can I get a speed limiter fitted in Liverpool?

Yes. AutoKontrol fits speed limiters right across Liverpool and the Liverpool City Region. Our engineers come to your depot or yard, so there is no need to take vehicles off-site.

Do you offer mobile fitting across Merseyside?

Yes. Mobile fitting is our standard approach. Through the SGH Connect installer network we cover Liverpool and the wider Merseyside area, and we schedule fleet rollouts to keep multiple vehicles moving through in a single visit.

How much does speed limiter fitting cost in Liverpool?

Cost depends on your vehicle types, fleet size, and the system you choose. The best way to get an accurate figure is to get a quote with your fleet details, and we will put together a proposal covering pricing, timeline, and logistics.

Get started

Ready to fit speed limiters to your Liverpool fleet?

• Get a free quote with your vehicle types, fleet size, and depot location.
• View our speed limiter range including System 80, TrackSpeed, and GeoKontrol.
• Call our technical team to talk through your fleet and the right system for your operation.